Referred Journal Publications

Lamarche-Gagnon, M.E., Molavi-Zarandi, M., Raymond, V., Ilinca, F. (2024). Additively-manufactured conformal cooling channels through topology optimization, Structural and Multidisciplinary Optimization.

Ibhadode O, Zhang Z, Sixt J, Nsiempba K, Orakwe J, E Osazee, Shahabad S, Bonakdar A, Toyserkani E, 2023 “Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook” Virtual and Physical Prototyping (NVPP), https://doi.org/10.1080/17452759.2023.2181192.

Zhang Z, Imani Shahabad S, Ibhadode O, Dibia Chinedu Francis, Bonakdar A, Toyserkani E, 2023 “3-Dimensional heat transfer modeling for laser powder bed fusion additive manufacturing using parallel computing and adaptive mesh” Optics and Laser Technology, https://doi.org/10.1016/j.optlastec.2022.108839.

Hu, J., Molavi-Zarandi, M., & Pasini, D. (2023). Topology Optimization of Lattice Support Structure for Cantilever Beams Fabricated via Laser Powder Bed Fusion. Advanced Engineering Materials. DOI:10.1002/adem.202300976

Aburakhia A, Bonakdar A, Molavi-Zarandi M, Keller J, Abdolvand H, 2022 “On the effects of additive manufacturing process parameters on the performance of Hastelloy-X: A neutron diffraction experiment and crystal plasticity finite element modeling” Design and Materials, https://doi.org/10.1016/j.matdes.2022.111030.

Imani Shahabad S, Ali U, Zhang Z, Keshavarzkermani A, Esmaeilizadeh R, Bonakdar A, Toyserkani E, 2022 “On the effect of thin-wall thickness on melt pool dimensions in laser powder-bed fusion of Hastelloy X: Numerical modeling and experimental validation” Journal of Manufacturing Processes, https://doi.org/10.1016/j.jmapro.2022.01.029.

Zhang Z, Ibhadode O, Bonakdar A, Toyserkani E, 2021 “TopADD: A 2D/3D integrated topology optimization parallel-computing framework for arbitrary design domains” Structural and Multidisciplinary Optimization, https://doi.org/10.1007/s00158-021-02917-z.

Ibhadode O, Zhang Z, Bonakdar A, Toyserkani E, 2021 “IbIPP for Topology Optimization – An Image-Based Initialization and Post-Processing Code Written in MATLAB” SoftwareX, Vol 10. https://doi.org/10.1016/j.softx.2021.100701.

Keshavarzkermani A, Esmaeilizadeh R, Enrique P D, Zhou Y N, Bonakdar A, Toyserkani E, 2021 “Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion” Materials Characterization, https://doi.org/10.1016/j.matchar.2021.110969.

Esmaeilizadeh R, Keshavarzkermani A, Mahmoodkhani y, Behrvesh B, Jahed H, Bonakdar A, Toyserkani E, 2021 “On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study” Additive Manufacturing, https://doi.org/10.1016/j.addma.2020.101805.

Ibhadode O, Zhang Z, Rahnama P, Bonakdar A, Toyserkani E, 2020 “Topology optimization of structures under design-dependent pressure loads by a boundary identification-load evolution (BILE) model” Structural and Multidisciplinary Optimization, https://doi.org/10.1007/s00158-020-02582-8.

Zhang Z, Ibhadode O, Ali U, Dibia F C, Rahnama P, Bonakdar A, Toyserkani E, 2020 “Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing” International Journal of Mechanics and Materials in Design, https://doi.org/10.1007/s10999-020-09494-x.

Imani Shahabad S, Zhang Z, Keshavarzkermani A, Ali U, Mahmoodkhani Y, Esmaeilizadeh R, Bonakdar A, Toyserkani E, 2020 “Heat Source Model Calibration for Thermal Analysis of Laser Powder-Bed Fusion” International Journal of Advanced Manufacturing Technology, 106: 1-13. DOI: https://doi.org/10.1007/s00170-019-04908-3.

Esmaeilizadeh R, Keshavarzkermani A, Ali U, Mahmoodkhani y, Behravesh B, Jahed H, Bonakdar A, Toyserkani E, 2020 “Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed” Journal of Alloys and Compounds, https://doi.org/10.1016/j.jallcom.2019.152097.

Keshavarzkermani A, Marzbanrada E, Esmaeilizadeh R, Mahmoodkhani Y, Zhou Y N, Bonakdar A, Toyserkani E, 2019 “Controlling mechanical properties of additively manufactured Hastelloy X by altering solidification patterns during laser powder bed fusion” Materials Science & Engineering A, https://doi.org/10.1016/j.msea.2019.138081.

Keshavarzkermani A, Marzbanrada E, Esmaeilizadeh R, Mahmoodkhani Y, Zhou Y N, Bonakdar A, Toyserkani E, 2019 “An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion” Optics and Laser Technology, https://doi.org/10.1016/j.optlastec.2019.03.012.

Mohsen K. Keshavarz, Sylvain Turenne, Bonakdar A, 2018 “Solidification behavior of Inconel 713LC gas turbine blades during electron beam melding” Journal of Manufacturing Processes, https://doi.org/10.1016/j.jmapro.2017.11.021.

Bonakdar A, Zarandi MM, Chamanfar A, Jahazi M, 2017 “Finite element modelling of the electron beam welding of Inconel-713LC gas turbine blades” Journal of Manufacturing Processes, https://doi.org/10.1016/j.jmapro.2017.02.011.

Chamanfar A, Jahazi M., Rosenbaum A, Bonakdar A, Morin E, 2017 “Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees” Materials Characterization, https://doi.org/10.1016/j.matchar.2017.08.002.

Chanamfar A, Jahazi M, Bonakdar A, Morin E, 2015 “Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades” Materials Science & Engineering A, https://doi.org/10.1016/j.msea.2015.06.087.

Mohammadi F, Sedaghati and Bonakdar A, 2014 “Finite element analysis and design optimization of low plasticity burnishing process” International Journal of Advance Manufacturing Technology, https://doi.org/10.1007/s00170-013-5406-y.

Patents

Bonakdar A, Imani Shahabad S, Toyserkani E, 2021 (filed) “Thermal modeling approach for powder bed fusion additive manufacturing”, Publication numbers: EP4035802, WO2022161657.

Bonakdar A, Keshavarzkermani A, Toyserkani E, 2021 (filed) “Solidification and grain structure simulation of laser powder bed fusion additive manufacturing process” Publication numbers: EP4059641A1, WO2022194432A1.

Bonakdar A, Ibhadode O, Toyserkani E, 2020 (filed) “Computer-implemented topology optimization model for components under design-dependent loads”, Publication numbers: EP4012595, WO2022122229.

Bonakdar A, Ibhadode O, Toyserkani E, 2020 (filed) “Computer-implemented method of reducing support structures in topology optimized design for additive manufacturing”, Publication numbers: EP4016365, WO2022128361.

Bonakdar A, Ali U, Mahmoodkhani Y, Liravi F, Chenouri S, and Toyserkani E, 2019 (filed) “Method and system for optimizing process parameters in an additive manufacturing process”, Publication number: WO 2020/204883 A1.

Conferences

Bonakdar A, Orakwe J, Ibhadode O, Toyserkani E, 2024, “Topology Optimization of an Additively-Manufactured Heat Exchanger”, AeroMat 2024 Conference, Charlotte, NC, USA

Bonakdar A, Imani Shahabad S, Zhang Z, Toyserkani E, 2024, “Novel Accelerated Thermo-Mechanical LPBF Modelling Using an Effective Heat Source”, AeroMat 2024 Conference, Charlotte, NC, USA

Orakwe J, Ibhadode O, Bonakdar A, Toyserkani E, 2023 “Design for Additive Manufacturing: Redesign, Performance, and Manufacturability Analysis of a Single Non-Compressible Fluid-Flow Heat Exchanger”, Holistic Innovation in Additive Manufacturing Conference, Halifax, NS, Canada.

Mozafarighoraba A, Aburakhia A, Bonakdar A, Abdolvand A, 2023 “The Effects of Process Parameters on the Development of Internal Strains in Laser Powder Bed Fusion Additive Manufacturing of Hastelloy-X”, Holistic Innovation in Additive Manufacturing Conference, Halifax, NS, Canada.

Imani Shahabad S, Zhang Z, Bonakdar A, Toyserkani E, 2023 “Novel Accelerated Thermo-mechanical LPBF Modelling Using an Effective Heat Source”, Holistic Innovation in Additive Manufacturing Conference, Halifax, NS, Canada.

Aburakhia A, Bonakdar A, Molavi-Zarandi M, Keller J, Abdolvand H, 2021 “On the effects of Additive Manufacturing process parameters on the Macroscopic and Microscopic behavior of Hastelloy-X”, Canadian Materials Science Conference, Online, Canada.

Imani Shahabad S, Zhang Z, Keshavarzkermani, Bonakdar A, Toyserkani E, 2021 “The Effect of Laser Scanning Stripe Width on Melt Pool Geometries in Laser Powder-bed Fusion Additive Manufacturing Process” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Esmaeilizadeh R, Keshavarzkermani A, Bonakdar A, Jahed H, Toyserkani E, 2021 “Fatigue Behaviour of Additively Manufactured Hastelloy X” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Zhang Z, Imani Shahabad S, Bonakdar A, Toyserkan E, 2021 “Heat Transfer Modeling of Multi-track Laser Scanning in Laser Powder-bed Fusion Additive Manufacturing Using Adaptive Mesh” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Ibhadode O, Zhang Z, Rahnama P, Bonakdar A, Toyserkani E, 2020 “Design for additive manufacturing: A multiphysics topology optimization model for conceptual structural designs under realistic loads and boundary conditions” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Imani Shahabad S, Ali U, Zhang Z, Keshavarzkermani A, Esmaeilizadeh R, Bonakdar A, Toyserkani E, 2020 “The effect of part geometries on melt pool dimensions in laser powder bed fusion process (LPBF)” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Esmaeilizadeh R, Keshavarzkermani A, Jahed H, Bonakdar A, Toyserkani E, 2020 “An investigation on the tensile and fatigue behavior of laser powder-bed fusion Hastelloy X” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Zhang Z, Ibhadode O, Bonakdar A, Toyserkani E, 2020 “Comparison of volumetric heat sources in the thermomechanical modeling of the laser powder-bed fusion additive manufacturing” Holistic Innovation in Additive Manufacturing Conference. Online, Canada.

Bonakdar A, 2019 “Industrialization of Additive Manufacturing: A Journey from Fundamental Research to Production”, Holistic Innovation in Additive Manufacturing Conference, Vancouver, BC, Canada.

Zhang Z, Ibhadode O, Rahnama P, Bonakdar A, Toyserkani E, 2019 “Topology optimization of support structures for laser powder-bed fusion based on the inherent strain method”, Holistic Innovation in Additive Manufacturing Conference, Vancouver, BC, Canada.

Imani S, Kasinathan AR, Zhang Z, Mahmoodkhani Y, Ali U, Keshavarzkermani A, Toyserkani E, Bonakdar A, 2019 “Numerical analysis of melt pool geometry in laser powder-bed fusion of Hastelloy X”, Holistic Innovation in Additive Manufacturing Conference, Vancouver, BC, Canada.

Keshavarzkermani A, Marzbanrad E, Esmaeilizadeh R, Mahmoodkhani Y, Zhou Y N, Bonakdar A, 2019 “Correlating the columnar grain structure with the anisotropic mechanical response of Hastelloy X produced by laser powder-bed fusion”, Holistic Innovation in Additive Manufacturing Conference, Vancouver, BC, Canada.

Zarandi MM, Bonakdar A, Sedaghati R, 2019 “Evaluation of residual stresses induced in laser powder-bed fusion additive manufacturing process: finite element simulation and experimental investigation”, Holistic Innovation in Additive Manufacturing Conference, Vancouver, BC, Canada.

Mahmoodkhani Y, Ali U, Liravi F, Marzbanrad E, Toyserkani E and Bonakdar A, 2018 “Determination of the most contributing selective laser melting process parameters on the surface roughness quality of Hastelloy X components”, Global Power and Propulsion Society (GPPS) Conference, Montreal, Quebec, Canada.

Rosenbaum A, Chamanfar A, Jahazi M and Bonakdar A, 2014 “Microstructure analysis of broached Inconel-718 gas turbine disc fit-trees”, ASME TE 2014, GT2014-26972.