Quality
-
Layer Height
- Height of each printing layer in millimeters. As one may expect, higher values will result in a lower resolution but slower print and vice versa for lower values.
-
Initial Layer Height
- Height of the initial printed layer in millimeters. Generally, a thicker initial layer will result in better build plate adhesion.
-
Line Width
- Width in millimeters of each printed line of filament. Usually will be set to the width of your selected nozzle, although it can be reduced to improve print resolution if need be.
-
Wall Line Width
- Width of a shell’s line of filament, measured in millimeters
-
Top/Bottom Line Width
- Width of a single line of filament on the top or bottom layers of a print, measured in millimeters
-
Infill Line Width
- Width of a single line of infill material, measured in millimeters
-
Initial Layer Line Width
- Represented as a percentage multiplier of the standard line width. Much like initial layer height, wider base lines can result in better adhesion.
