Troubleshooting Guide:
Ultimaker S5 Printer Resources:
Print Core Troubleshooting:
Slicer Troubleshooting:
Network Troubleshooting Ultimaker Cura:
Unsupported Profile:
Loading Error Support:
Material failed to load wizard:
Error Code Resources:
ER27: Unspecified Error
ER28: Print Core Max Temp
ER33: X or Y axis stuck or Limit Switch Broken
ER34: Print Head Communication Error
ER35: I2C Communication Error
ER37: Print Head Sensor Error
ER38: Active Leveling Correction Failed
ER41: Motion Controller Failed To Update
ER42: Print Job Not Suitable For Printer
ER44: Unable to Download Firmware Due to Lack of Space on Printer
ER45: Capacitive Sensor Low Performance or Interference Detected
ER50: Unexpected Filament Position in Material Station
ER51: Filament too short for use with Material Station
ER52: Decoupler Obstructed
ER53: Filament too short for use with Material Station
ER54: Filament Loading Unsuccessful
ER55: Filament too short for use with Material Station
ER57: Material Station Filament Loading Error
ER61: Material Station failed to unload material
ER63: Cleaning the Ultimaker S5
ER64: Cannot Select Grayed Out Material
ER65: Flow Sensor Error
ER67: Dehumidifier is not working correctly
ER68: The humidity in the Material Station is high
ER86: Air Manager is unable to rotate at the desired speed
ER998: Unspecified error has occurred
ER999: Unspecified error has occurred
